Bulk Material Handling & Surface Protection

  • MONDAY - FRIDAY (08 AM - 05 PM)

    Head Office Operation

  • MAIL US

    info@beltcare.com

  • PHONE US

    (021) 658-33666

BELT LIFTER

Dimensions SPARCRIC G

BELT WIDTH SIDE A SIDE B SIDE C SIDE D One-way
valve		 5PSI pressure
relief valve
500-800 765 335 160 200 1 1
1,000-1,200 1,141 455 160 250 1 1
1,400-1,600 1,660 654 225 300 2 1
1,800-2,000 2,000 769 250 350 2 1

 



Crosspieces

BELT WIDTH LENGTH HEIGHT WIDTH
500-800 1,100 100 200
1,000-1,200 1,500 100 260
1,400-1,600 2,000 150 304
1,800-2,000 2,400 150 360

 



SPECIFICATIONS

  • Nominal load: See table below for maximum usage loads
  • Maximum pressure: 0.34 bar = 5 PSI
  • Weight of the whole equipment (without the pump): from 4 to 20 kg (see details on page 8 according to the model).
  • Lifetime: 5,000 cycles (inflation/deflation).
  • Operating temperature range: -10°C to + 40°C
  • Temperature range for transport/storage: -20°C to + 40°C
  • Relative air humidity: Less than or equal to 90% at 20°C

Maximum load for use of aluminium crosspieces

BELT WIDTH MAX
PRESSURE		 MAX LOAD of
aluminium
crosspiece		 WEIGHT of
aluminium
crosspiece (Kg)
500-800 0.34 Bar/5 psi 550 Kg 3.05
1,000-1,200 0.34 Bar/5 psi 390 Kg 6.12
1,400-1,600 0.34 Bar/5 psi 790 Kg 13.85
1,800-2,000 0.34 Bar/5 psi 650 kg 18.06

 

 

 

Maximum working pressure of the whole equipment

BELT WIDTH MAX
PRESSURE		 WEIGHT OF ENTIRE
EQUIPMENT (without pump)
500-800 0.34 Bar/5 psi 5 Kg
1,000-1,200 0.34 Bar/5 psi 8 Kg
1,400-1,600 0.34 Bar/5 psi 15 Kg
1,800-2,000 0.34 Bar/5 psi 20 kg

 

 

 

 

How to use the one-way valve:

  • One-way valve cap (the valve lets air in and prevents it from coming out).
  • Remove the valve cap by rotating it a ¼ turn clockwise.
  • Put the end of the hose on the valve.
  • Insert the end of the hose into the valve by rotating it a ¼ turn anti-clockwise and inflate.
  • Remove the hose from the valve. Close the cap once the SPARCRIC G is inflated.
    Proceed with manoeuvring the rollers.
  • To deflate, remove the cap then press the valve plunger with the spring in its middle. Replace the cap when deflated to avoid dirtying or damaging the valve.

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

 

 

 

Idler frame maintenance operating mode

  • Place the SPARCRIC G on the conveyor frame, keep a distance of 100 mm from the idler frame in order to avoid any contact between the SPARCRIC G and the target idler frame
  • Inflate the SPARCRIC G to a pressure of approximately 0.34 bar/5 psi to access the rollers.
  • Before carrying out maintenance, check that there are no objects between the belt and the rollers.
  • Deflate and remove the SPARCRIC G.
  • Check that the rollers are in place before restarting.

 

 

 

 

 

 

 

Others Conveyor Product Solution